Chapter 7 — Configuring the Computer
78 CS40 Mobile Computer User’s Manual
5 For Pre-Shared Key, enter the pre-shared key or the passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the authenticator. The passphrase must be from 8 to 63 characters.
After you enter a passphrase, the mobile computer internally
converts it to a pre-shared key.
6 Save your settings.
Configuring 802.1x Security with Microsoft
After you configure the communications and radio parameters on
your mobile computer and select Microsoft as your security choice,
you can configure 802.1x security with Microsoft.
To configure 802.1x security with Microsoft security:
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Microsoft Security.
3 For Infrastructure Mode, choose Infrastructure.
4 For Network Authentication, choose Open.
5 For Data Encryption, choose WEP.
6 For 802.1X Authentication, choose TLS or PEAP.
7 If you choose TLS:
a Choose Properties > Run App. The Auth. Settings box appears.
b Choose Select.
c Select your certificate from the list and press Enter. The User
Logon dialog box appears.
d Enter a User Name and a Domain.
8 If you choose PEAP:
a Choose Properties > Run App. The Auth. Settings box appears.
b Select Validate Server and press Enter. When the radio starts
to authenticate, the Network Password dialog box appears.
c Enter a User Name and Password and select Save Password.
d (Optional) In the Domain field, enter the domain.
To Next Page
Loading...
Need help?
General
