Intermec CV41

Chapter 1 — About the Computer
8 CV41 Vehicle Mount Computer (Windows CE) User Guide
2 Pull down on the red quick release handle.
3 Pull the bottom of the CV41 away from the smart dock.
4 Lift the CV41 away from the dock.
About Auto-On for the CV41
The Auto-On feature turns on the CV41 when external power is
applied to the computer. When Auto-On is disabled, the CV41
monitors the ignition input signal and turns on the computer when
the ignition on your vehicle is active.
To disable the Auto-On feature, you must wire the ignition input wire
from your CV41 to your vehicle to monitor the ignition input signal.
For more information, see the CV41 Vehicle Mounting Kit Reference
Guide.
Enable Auto-On
When Auto-On is enabled, the CV41 turns on when external power is
applied. For example, when the smart dock is powered on and:
• the CV41 is placed into the dock.
• the CV41 is placed into the dock and the vehicle is turned on.
1 Tap Start > Settings > Control Panel > Options. The Options
screen appears.
2 Tap the Misc tab.
3 Select Enable Auto-On and tap OK.
Disable Auto-On
When Auto-On is disabled, the CV41 is turned off, and the ignition
input signal:
• is inactive, the CV41 remains off.
• changes to active, the CV41 turns on.
When the Auto-On is disabled, the CV41 is turned on. and the ignition
input signal:
• changes to active, the CV41 stays on.