Chapter 3 — Manage the Computer
CV41 Vehicle Mount Computer (Windows CE) User Guide 39
next section, “Update Bundles Using SmartSystems
Foundation” on page 39.
• You can update individual computers using ActiveSync.
Update Bundles Using SmartSystems Foundation
You can use the SmartSystems console to update the SSPB on your
CV41. The console is part of SmartSystems Foundation and is
available from the Intermec website. Before you can update your CV41,
you need:
• SmartSystems Foundation. To download SmartSystems
Foundation, go to www.intermec.com/SmartSystems and click
the Downloads tab.
• the SSPB files you want to install. These SSPB files are available
from the Intermec website at www.intermec.com. Go to Support
> Downloads > OS/Firmware/Drivers list.
After you locate these items, you can update your CV41 using
SmartSystems Foundation.
1 Open the SmartSystems console.
2 Make sure the computer is discovered.
3 Make sure the computer is in the powered smart dock and that
power management is disabled.
4 Download the SmartSystems bundle to your PC.
5 Double-click the SmartSystems bundle on your PC to extract the
update files to the software vault.
6 From the SmartSystems console, locate the bundle to install and
drag them to each computer (or group in a folder) you want to
update. The SmartSystems console installs the update to your
computers.
After the download is complete, your computer begins the update
process and automatically performs a cold boot. The computer
then boots into a special Update Loader mode where the computer
has no network connections and is completely unusable. This
process can take anywhere from 30 seconds to 15 minutes
depending on the update. After the update is complete, the
computer boots again.
To Next Page
Loading...
