Chapter 4 — Configure the Computer
56 CV41 Vehicle Mount Computer (Windows CE) User Guide
Required USB Cables For the SR30 or SR61T
Connect to a Serially Tethered Scanner
Use this procedure to connect your computer to connect a tethered
scanner and enable RS-232 communications. For the SR30 or SR61T,
you must purchase the correct serial cable to use with the CV41. For
more information, see the following table.
Required Serial Cables For the SR30 or SR61T
1 Connect the scanner to the COM1 or COM2 port.
2 From the Intermec Settings main menu, select Tethered Scanner
(COM 1 or COM 2).
3 Tap Scanner Settings.
Scanner Model Required Cable
SR30 6.5 ft (1.9 m) cable (P/N 236-159-002)
SR61T (Gen 1) 6.5 ft (1.9 m) cable (P/N 236-182-001)
SR61T (Gen 2) 6.5 ft (1.9 m) cable (P/N 236-240-001)
Scanner Model Required Cable
SR30 6.5 ft (1.9 m) cable (P/N 236-164-002)
SR61T (Gen1, Gen 2)
• 6.5 ft (1.9 m) cable (P/N 236-197-001)
• 12 ft (3.6 m) cable (P/N 237-197-001)
To Next Page
Loading...
