Chapter 3 — Manage the Computer
CV41 Vehicle Mount Computer (Windows CE) User Guide 37
Install Applications Using an SD Card
Use an SD card to install applications on one computer at a time or if
you have no network connection.
1 Copy your application file to the storage card.
2 Install the SD card in the CV41.
3 On the CV41, browse to the SD Card folder and run your
application.
Launch Applications Automatically
There are two ways to launch an application automatically on a cold
boot:
• Set up your .cab file to place a shortcut to the application in the
\Windows\StartUp directory at install time.
• Use AutoRun.exe to start your application at boot time. AutoRun
ships on the computer and automates other operations.
At boot time, AutoRun executes any commands found in its data file,
Autouser.dat. For more information on how to use the AutoRun.exe
feature, see the Readme.txt file located in the My Device\Flash File
Store\2577 directory on your computer.
Update the System Software
The computer uses a series of cab files to update the operating system
(OS), low-level firmware, and SmartSystems Platform Bundle (SSPB)
files.
SSPB files deliver Intermec functionality such as data collection,
configuration, and wireless security to your CV41. As new features are
added to these components, you can upgrade your SSPB files without
needing to upgrade the operating system. Similarly, features added to
the operating system do not affect the functionality of the SSPB, and
you can choose to upgrade only the operating system.
To Next Page
Loading...
