Chapter 4 — Configure the Computer
CV41 Vehicle Mount Computer (Windows CE) User Guide 49
Use Intermec Settings to determine the profiles you want the end user
to see in the Profile Settings application.
1 Go to Device Settings > Profile Settings Application.
2 Select Always on, Maximizing battery life, or Normal.
3 From the submenus, select or clear the Show option in Profile
Settings check box for the settings you want to have available to
the end user.
4 Click OK to save your selection.
Restore Default Settings
You can easily restore a menu to its default settings or all of the
Intermec Settings parameters to their default settings if necessary.
1 Navigate to the menu that you want to restore to defaults.
2 Tap Menu > Restore Menu Defaults.
To Next Page
Loading...
