Chapter 5 — Troubleshoot and Maintain the Computer
84 CV41 Vehicle Mount Computer (Windows CE) User Guide
Replace the Fuse
The CV41 uses a 10 A time delay (slow blow) fuse, which is located on
the smart dock. If you need to replace the fuse, make sure that you
replace it with the same size, rating, and type of fuse (Littelfuse 03260
10 MXP or equivalent).
1 Remove the CV41 from the smart dock.
2 Disconnect the smart dock from power.
3 Using a flathead screwdriver, remove the fuse holder from the
CV41.
4 Replace the fuse.
5 Secure the fuse holder back into the CV41.
Clean the Computer
To keep the computer in good working order, you may need to clean
the touch screen. Clean the touch screen as often as needed for the
environment in which you are using the computer. To clean the
computer, use a solution of ammonia and water.
1 Press the Power button to suspend the computer.
2 Dip a clean cloth towel in the ammonia solution and wring out the
excess.
Fuse holder
To Next Page
Loading...
