Chapter 1 — About the Computer
14 CV41 Vehicle Mount Computer (Windows CE) User Guide
2 Press the Power button to place the CV41 in Suspend mode.
3 Using a small Phillips screwdriver, remove the two screws that
secure the SD card access panel.
4 Insert the SD card into the SD card slot.
5 Reattach the SD card access panel and screw to a torque value of 4-5
in/lbs.
6 Reattach the CV41 to the smart dock.
7 Press the Power button to resume the CV41 from Suspend mode.
SD card
access panel
SD card slot
To Next Page
Loading...
