Intermec EasyCoder F4 User Manual

Intermec EasyCoder F4 – Installation & Operation Ed. 390
Chapter 12 Maintenance
Printhead Replacement, cont.
Connect the two cables to the replacement
printhead.
Put back the printhead in reverse order and
check that the printhead cables run freely.
9
Load a new supply of media and ribbon, as
described earlier in this manual.
Turn the printhead lift lever counterclockwise
so the magnet engages the printhead bracket.
87
10

Intermec EasyCoder F4 Specifications

General

Brand	Intermec
Model	EasyCoder F4
Category	Printer Accessories
Language	English