EasyLAN Wireless Interface Kit Installation Instructions 37
5
Setup in IPL
is chapter explains how to set up the wireless
network communication in printers running IPL
v2.40 (or later). e only requirement on the PC side
is a terminal program that can transmit and receive
ASCII characters on an RS-232 line. us, this
method is recommended when you do not have the
opportunity to run the PrintSet program, for example
because you use some other operating system than
Windows.
For information on how to set up the network
communication in printers running Fingerprint, refer
to Chapter 4, “Setup in Fingerprint.”
To Next Page
Loading...
Need help?
General
