Intermec SR60 Programmer's Reference Manual

Chapter 4 — Enabling and Configuring Symbologies
86 SR60 Scanner Programmer’s Reference Manual
Read Verification
Scan the following bar codes to set the minimum number of
reads required to verify Code 128 and UCC/EAN 128
symbologies.
6 ---------
7 ---------
8 ---------
9 ---------
Note: The more times the scanner is required to read and
compare the bar code data, the longer the scanner takes to
validate and transmit a label.
SET------------------------------------

Intermec SR60 Specifications

General

Brand	Intermec
Model	SR60
Category	Barcode Reader
Language	English