Intermec SR60

Chapter 2 — Configuring Interface Settings
24 SR60 Scanner Programmer’s Reference Manual
Caps Lock
You can set three Caps Lock settings:
• The Caps Lock Off bar code sends character data to the host
in normal format.
• The Caps Lock On bar code sends character data to the host
in reverse case:
• (a-z) = (A-Z)
•(A-Z) = (a-z)
Use this feature if your keyboard Caps Lock key is on.
• The Caps Lock = Shift-Lock bar code sends character data to
the host in shifted case. This option may be used only with
interface type G (IBM 3xxx 122-keyboard) with the Shift
Lock key on.
SET-------------------------------------
Caps Lock Off ---------
Caps Lock On ---------
Caps Lock =
ShiftLock ---------