Intermec SR60 Programmer's Reference Manual

Chapter 4 — Enabling and Configuring Symbologies
SR60 Scanner Programmer’s Reference Manual 77
Minimum Label Length
The following procedure explains how to set the Code 39
Minimum Label Length.
To set Code 39 Minimum Label Length
1 Identify the minimum label length setting you want to make.
The selectable range is 00 to 48 characters.
Start/ Stop
Don’t Transmit ---------
Transmit ---------
Code 39 Full ASCII
Enable ---------
Disable ---------
END------------------------------------

Intermec SR60 Specifications

General

Brand	Intermec
Model	SR60
Category	Barcode Reader
Language	English