Intermec SR60 Programmer's Reference Manual

Chapter 4 — Enabling and Configuring Symbologies
SR60 Scanner Programmer’s Reference Manual 117
Code 93 Options
This section describes the Code 93 options and contains the
programming bar codes you can use to configure those options.
About Code 93 Options
The Code 93 symbology has the following programmable
features:
• Minimum Label Length
•Read Verification
Minimum Label Length
Minimum Label Length sets the minimum label length required
for Code 93 symbology. This feature causes the scanner to ignore
small label segments, reducing the possibility that a portion of a
good label is incorrectly seen as an entire label.
Read Verification
Read Verification is the number of times the scanner is required
to read the bar code data before sending the label data to the host.
Two Reads ---------
Three Reads ---------
Four Reads ---------
END------------------------------------

Intermec SR60 Specifications

General

Brand	Intermec
Model	SR60
Category	Barcode Reader
Language	English