Chapter 4 — Enabling and Configuring Symbologies
SR60 Scanner Programmer’s Reference Manual 129
IATA Options
IATA is a special symbology subset of Standard 2 of 5. Enabling
IATA selects this custom code as the active Standard 2 of 5
symbology. When IATA is enabled, Standard 2 of 5 labels are not
read.
Scan the following bar codes to enable or disable IATA.
Set to Three Reads ---------
Set to Four Reads ---------
END------------------------------------
SET-------------------------------------
Enable ---------
Disable ---------
To Next Page
Loading...
