Intermec SR60

Chapter 3 — Configuring Label Transmit Settings
60 SR60 Scanner Programmer’s Reference Manual
Industry standards have been established for symbology-specific
label identifiers, which are listed in the next table. Most scanners
have factory default identifiers preset to these standards.
Industry Standard Label Identifiers (Prefixes)
Symbology Identifier (ID)
UPC-A A
UPC-E E
EAN-8 FF
EAN-13 F
UPC-A (with 2 add-ons) A
UPC-A (with 5 add-ons) A
UPC-A (with 8 add-ons) A
UPC-E (with 2 add-ons) E
UPC-E (with 5 add-ons) E
UPC-E (with 8 add-ons) E
EAN-8 (with 2 add-ons) FF
EAN-8 (with 5 add-ons) FF
EAN-8 (with 8 add-ons) FF
EAN-13 (with 2 add-ons) F
EAN-13 (with 5 add-ons) F
EAN-13 (with 8 add-ons) F
Code 39 *
PharmaCode A
Codabar %
Interleaved 2 of 5 i
Standard 2 of 5 i
Code 93 &
Code 128 #
UPC/EAN 128 None
MSI/Plessey @