Chapter 4 — Enabling and Configuring Symbologies
SR60 Scanner Programmer’s Reference Manual 123
• The No Second Fixed Length bar code on page 126
configures the scanner to recognize only the first fixed
length.
Read Verification
Read Verification is the number of times the scanner is required
to read the bar code data before sending the label data to the host.
Configuring the Standard 2 of 5/IATA Options
Scan the following bar codes to configure the Standard 2 of 5/
IATA symbology options.
Check Digit
SET-------------------------------------
Don’t Calculate ---------
Calculate ---------
Don’t Transmit ---------
Transmit ---------
END------------------------------------
To Next Page
Loading...
