Intermec SR61T1D - Configuring Label Transmit Settings

SR60 Scanner Programmer’s Reference Manual 47
3
Configuring Label Transmit
Settings
This chapter contains the programming bar codes for configuring
the optional prefix, suffix, and label ID which may be sent in
addition to bar code data if your SR60 scanner is configured for
the RS-232 or Keyboard Wedge interface. You will find these
sections in this chapter:
• When to Configure Label Transmit Settings
• How to Use the Prefix, Suffix, and Label ID
• Setting Global Prefixes and Suffixes
• Setting a Prefix or Suffix
• Setting a Label ID