Intermec SR61T1D

Appendix A — Factory Default Configuration
154 SR60 Scanner Programmer’s Reference Manual
Symbology Defaults
Feature Default Your Setting
Code 39 Enable
Calculate Check Digit Don’t Calculate
Tr a n s m i t C h e c k D i g i t Tr a n s m i t
Start/Stop Don’t Transmit
Code 39 Full ASCII Disable
Minimum Label Length 2
Read Verification 1
Code 39 Emulate Function
Keys (USB interface only)
Disable
PharmaCode 39 Disable
Calculate Check Digit Don’t Calculate
Tr a n s m i t C h e c k D i g i t Tr a n s m i t
Start/Stop Don’t Transmit
Code 128 UCC/EAN 128 Enabled
Minimum Label Length 2
Read Verification 1
Interleaved 2 of 5 Enable
Calculate Check Digit Don’t Calculate
Tr a n s m i t C h e c k D i g i t Tr a n s m i t
Minimum Label Length 8
Read Verification 1
Codabar Disable
Calculate Check Digit Don’t Calculate
Tr a n s m i t C h e c k D i g i t Tr a n s m i t
Gap Check Enable
Minimum Label Length 3
Start/Stop abcd/abcd
Start/Stop Match Required Disable
Start/Stop Transmission Enable
Read Verification 1
UPC-A Disable
Check Digit Send
NSD Option Send NSD