18
Version 1.1 (11/2011) en
Original language
Product information
9006 Hybrid Control for RollerDrive
Speed settings
On board speed setting The speed can be continuously adjusted (between 100% and 33% for the
EC100, EC110, and EC120) by the rotary switch marked "speed" on the
9006. Default setting is maximum.
Hint
If more than one 9006 has to run with reduced speed, it is recommended
to set the speed externally (by PLC or external potentiometer; see "External
speed setting", page 19).
To Next Page
Loading...
Need help?
General
