EasyManua.ls Logo

Interroll 9006 - Installing the 9006 Hybrid Control in a conveyor system; Electrical installation

Interroll 9006
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
Version 1.1 (11/2011) en
Original language
Transport and storage
9006 Hybrid Control for RollerDrive
Transport and storage
Transport
Each 9006 is packed in its own carton case.
Do not stack more than four carton boxes.
Check the fixation of the 9006 before transport.
Avoid hard shocks during transport.
Check each 9006 visually for damage after transport.
In case of damage, take photos of the damaged parts.
To maintain the warranty, instantly report any damage caused during
transport to the transport company and to Interroll.
Do not transfer the 9006 between warm and cold environments as
this may cause condensing water.
Storage
Check each 9006 for damage after storage.
Risk of injury due to improper transport
Transport may only be carried out by qualified and
authorized persons.
Observe the following notices.
CAUTION
Risk of injury due to improper storage
Do not stack more than four carton boxes.
CAUTION

Related product manuals