Need help?Do you have a question about the Interroll 9006 and is the answer not in the manual?
General| Brand | Interroll |
|---|---|
| Model | 9006 |
| Category | Controller |
| Language | English |
Explains the different categories of danger signals used in the document.
Provides essential safety guidelines for operating the 9006 unit.
Defines who is authorized and qualified to work with the 9006 unit.
Lists potential dangers and damages that may occur while working with the 9006.
Identifies and labels the different parts of the 9006 Hybrid Control unit.
Shows the physical size specifications of the 9006 Hybrid Control unit.
Explains the Zero Pressure Accumulation functionality of the 9006.
Illustrates how zones work together in a ZPA conveyor configuration.
Details the features and functionalities of the 9006 Hybrid Control.
Describes the different modes of operation for the RollerDrive with 9006 controls.
Covers safety features related to motor overheating and stalling.
Explains the suitability of the 9006 for conveyors with inclines or declines.
Details the electrical connections and signals for the 9006.
Explains how sensors are connected to the 9006 unit.
Describes the communication protocol between 9006 units.
Explains the configuration settings available via DIP switches.
Details the function of the 16-position rotary switches for speed, acceleration, and deceleration.
Interprets the status indications provided by the LEDs on the 9006.
Identifies the specifications on the product label for correct usage.
Lists the technical specifications and parameters of the 9006.
Explains how to adjust the speed using the onboard rotary switch.
Describes methods for setting speed externally via potentiometer or PLC.
Provides DIP switch settings and corresponding wiring for different applications.
Illustrates a typical wiring setup for the 9006.
Shows wiring for external direction control in PNP mode.
Shows wiring for external direction control in NPN mode.
Details wiring for a left-to-right conveyor configuration.
Explains how to configure multiple RollerDrives within a single zone.
Describes the 9006's function as a standalone motor control board.
Outlines configuration and wiring for the 9006 when used as an entry zone.
Outlines configuration and wiring for the 9006 when used as an exit zone.
Explains how to reset and re-learn the zone length in Learn Mode.
Details wiring and settings for an entry zone with PLC handshake.
Details wiring and settings for an exit zone with PLC handshake.
Describes configuration for a zone connecting two PLC handshake zones.
Provides guidelines and precautions for transporting the 9006 unit.
Provides guidelines and precautions for storing the 9006 unit.
Alerts users to potential damage and risks during assembly.
Highlights critical safety and damage prevention points for electrical installation.
Step-by-step guide for physically mounting the 9006 unit.
Instructions for connecting the 9006 to the RollerDrive and other components.
Procedures and checks before the first operation of the 9006.
Steps to follow in the event of an accident or system failure.
Regular checks and tasks required to maintain the 9006.
Procedures for cleaning the 9006 unit to prevent malfunction.
A guide to diagnose and resolve common system problems.
Lists available accessories, plugs, and cables for the 9006.
Defines technical terms and acronyms used in the manual.
Declaration regarding compliance with EC directives.
To Next Page
