2
Version 1.1 (11/2011) en
Original language
Introduction
9006 Hybrid Control for RollerDrive
Introduction
Handling of the user manual
In this manual the 9006 Hybrid Control for RollerDrive for the EC100, EC110,
EC120 is referred to as 9006.
Content of the manual This manual contains important advice, notes, and information about the
9006 in all phases of its lifecycle:
• Transport, assembly, and commissioning
• Safe operation, maintenance, troubleshooting, and disposal
• Accessories
Validity of the manual The manual describes the 9006 as it is delivered by Interroll.
Special application designs require validation from Interroll and additional
technical instructions.
This manual is part of the
product
For trouble-free, safe operation and warranty claims, read this manual and
follow the instructions before handling the 9006.
Keep this manual near to the 9006.
Pass this manual on to any subsequent operator or occupant of the
9006.
Interroll does not accept any liability for malfunctions or defects due to non-
observance of this manual.
If you have any questions after reading this user manual, feel free to contact
our customer service. See the last page for contact information.
Warnings in this manual
The warnings in this document refer to risks which may arise while using the
9006. For relevant warnings, see "Safety", page 4 and the warnings
at the beginning of each chapter.
There are three categories of danger. The following signal words are used in the
document as required:
• Danger
• Warning
• Caution
Structure of warnings
Signal word Meaning
Danger Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
Warning Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
Caution Indicates a hazardous situation which, if not
avoided, may result in minor or moderate injury.
Nature and source of the hazard
Possible consequence of non-observance
Information about how to avoid the hazard.
DANGER
To Next Page
Loading...
Need help?
General
