39
6.1.6.1.2.3. SMS message text
Function - The text of the message to be sent when the rule is
triggered
Data type - Text
Variation
range
- Letters, digits and special characters - maximum length is
160 characters
Default
value
- .
Comment - Total length of the SMS message text together with status
information is limited to 160 characters. If the total length
is greater than this limit then the message text is cut and
status information is sent without changes.
6.1.6.1.2.4. Recipient number
Function - Selects phone number of the message recipient
Data type - Selection list
Variation
range
- User friendly names of the phone numbers which are
allowed
to communicate with the module
Default
value
- NUM 1 - the first number on the list
Comment - The phone number is selected on the basis of the list of
user friendly names and that’s why it is recommended to
use unique, easy to remember naming convention
6.1.6.1.2.5. Status sending
Function - Enables or disables the module status information
attachment to SMS message text
Data type - Selection list
Variation
range
- Yes
Status attached
No
Without status
Default
value
- Yes
Comment - Total length of the SMS message text together with status
information is limited to 160 characters. If the total length
is greater than this limit then the message text is cut and
status information is sent without changes.
6.1.6.2. Data sending
The list of rules for data transmission contains not more than 32 rules which are used
to trigger the transmission of the defined Status to the selected IP address. The list
items can be added or removed using popup menu that is invoked by clicking the right
mouse button on the list item in the MTM program window.
To Next Page
Loading...
Need help?
General