19
6. Configuration
The configuration of the MT-703 module is accomplished by means of MTManager
software (MTM). This software package is distributed free of charge to the users of our
telemetric equipment.
The MTManager is a programmatic environment designed especially for managing the
entire telemetric system despite of its size. It is capable to split hardware resources
between Projects and Folders to make the managing of even very complex telemetric
systems more effective.
All parameters described here become available for editing when the MT-703 module
is added into MTM environment and selected to edit. Details on functionality and MTM
usage are given in User Manual of MTManager.
6.1. Groups of parameters
To make the configuration easier, the working parameters of MT-703 module are
grouped into the following logical or functional groups:
Header
– contains parameters which describe the module, its firmware and
configuration (they cannot be modified).
General
– contains basic parameters used for setting operational mode of the module.
GPRS
– contains parameters required for login the module in GPRS network and
parameters that provide transmission reliability.
Authorized Numbers
– contains lists of phone numbers and IP addresses which are
allowed to communicate with the module.
Resources
– defines the working parameters of hardware and software resources used
in reading and processing of measured data.
Rules
– contains lists of communication tasks which are triggered by specified criteria.
Besides the above mentioned groups of parameters, the Initial setup
group is also
available. It provides pre-set values for selected resources of the module.
6.1.1. The Header group
The header of the telemetric module parameters structure stores basic information
describing the module itself, its configuration and versions of working configuration
files. The header information is not available for edit and is used only for viewing and
inspection purposes.
6.1.1.1. Module name
Function - Name associated with the module at the configuration phase
Data type - Text
Variation
range
- None, read-only parameter
Comment - n/a
To Next Page
Loading...
Need help?
General