Invertek optidrive cp2 - User Manual

AC Variable Speed Drive
0.75kW – 250kW / 1HP – 350HP
200 – 480 Volt 1 & 3 Phase
Advanced User Guide
Revision 2.00

Summary

Advanced User Guide

1. Optidrive P2 Parameter Set Overview

1.2. Parameter Structure Overview

Details the arrangement of parameters into groups and their access levels.

1.3. Parameter Descriptions

1.3.1. Parameter Group 1 - Basic Parameters

Lists and describes basic parameters like frequency limits and ramp times.

1.3.2. Parameter Group 2 - Extended parameters

1.3.3. Parameter Group 3 - PID Control

1.3.4. Parameter Group 4 - High Performance Motor Control

P4-01 Motor Control Mode

Selects the motor control method (e.g., Vector, V/F).

1.3.6. Parameter Group 6 - Advanced Functions

1.3.7. Parameter Group 7 - Motor Data

1.4. Parameter Group 9 - Programmable Logic Functions

1.7. Control Terminal Connections

1.7.1. P1-12 Function

Selects the main control source and primary speed reference.

1.7.2. P1-13 Function

Selects pre-assigned functions for digital inputs.

2. Drive Model Specific Parameter Variations

2.1. Available Effective Switching Frequency Options

Lists available switching frequencies by drive model and rating.

2.2. V;F Mode Voltage Boost Setting Options

4. Fieldbus Interface Support

4.1. Fieldbus Interface Options

4.7. Parameter Access Tables

4.7.1. Group 1: Basic Parameter Set (Level 1)

Access tables for basic parameter group 1 across various protocols.

4.7.2. Group 2: Extended parameter set (Level 2)

Access tables for extended parameter group 2 across protocols.

4.7.3. Group 3: User PID control (Level 2)

Access tables for PID control parameters across protocols.

4.7.4. Group 4: Motor control parameter set (Level 2)

Access tables for motor control parameters across protocols.

5. Diagnostic and Fault Messages

6. Rated Temperatures and De-rating curves

6.1. Thermal Management

Explains how the drive manages heatsink temperatures.

6.3. Size 2, 200-240 V

De-rating curves for Size 2, 200-240V drives.

6.3.2. 4.3 A, 7 A & 10.5 A Output, IP66

6.4. Size 2, 380-480 V

6.4.2. 2.2 A, 4.1 A, 5.8 A, 9.5 A Output, IP66

6.5. Size 3, 200-240 V & 380-480 V

6.5.2. 14 A, 15.3 A, & 18 A Output, IP66

6.6. Size 4, 200 - 240 V & 380-480 V

6.7. Size 5, 200 - 240 V & 380-480 V

6.8. Size 6, 200 - 240 V & 380-480 V

6.9. Size 7, 200 - 240 V & 380-480 V

7. Immunity Tests

7.1. Electrostatic Discharge (ESD)

8. General Technical and Performance Data

8.1. Electrical Data

8.2. Input Output Current Ratings

Lists input/output current ratings by frame size and voltage.

8.2.3. 525 Volt Input

8.5. Earth Leakage Current (Touch Current)

8.6. Digital & Analog I;O

Describes the specifications for digital and analog inputs/outputs.

8.7. Environmental Data

8.8. Response Times

8.10. Output Current Limit

Explains the output current limit and overload operation.

8.11. Under; Over Voltage Trip Levels

Details the trip levels for under and over voltage conditions.

Invertek optidrive cp2 Specifications

General

Enclosure Rating	IP20
Overload Capacity	150% for 60 seconds
Output Current	Varies by model (refer to specific model datasheet)
Communication Protocols	Modbus RTU
Dimensions	Varies by model (refer to specific model datasheet)
Braking	Built-in dynamic braking (optional external braking resistor)
Protection Features	Overcurrent, overvoltage, undervoltage, short circuit, overheating, phase loss
Operating Temperature	-10°C to +40°C
Weight	Varies by model (refer to specific model datasheet)