Goodrive10 Series Mini VFD Safety precautions
-4-
Note:
Select proper torque to tighten screws.
Keep the VFD, parts and components away from combustible materials during
maintenance and component replacement.
Do not carry out any isolation and pressure test on the VFD and do not measure the
control circuit of the VFD by megameter.
1.3.4 Device disposal
There are heavy metals in the VFD. Deal with it as industrial effluent.
When the life cycle ends, the product should enter the recycling system.
Dispose of it separately at an appropriate collection point instead of
placing it in the normal waste stream.
To Next Page
Loading...