INVT SPC Series User Manual

SPC Series Solar Pump Inverter Function parameter list
-19-
6 Function parameter list
The function group numbers correspond to the level-1 menus, the function codes
correspond to the level-2 menus, and the function parameters correspond to the level-3
menus.
The function code table contains:
Column 1 "Function code ": Code of the function group and parameter
Column 2 "Name": Full name of the function parameter
Column 3 "Description": Description of the function parameter. If the value is detected or
recorded, the value cannot be restored to the factory setting.
Column 4 "Default": Initial value set in factory.
Column 5 "Modify": Whether the parameter can be modified, and conditions for the
modification
"○" indicates that the value of the parameter can be modified when the inverter is in
stopped or running state.
"◎" indicates that the value of the parameter cannot be modified when the inverter is in
running state.
"●" indicates that the value of the parameter is detected and recorded, and cannot be
modified.
Note: The inverter automatically checks and constrains the modification of parameters,
which helps prevent incorrect modifications.
6.1 Function parameters related to control
P00 group Basic functions
Function
code
Name
Description
Default
Modify
P00.00
Speed control
mode
0: SVC mode 0
No need to install encoders. Applicable to
scenarios with requirements for low
frequency, great torque, and high speed
control accuracy. Relative to SVC mode
1, SVC mode 0 is more applicable to the
scenarios requiring small power.
1: SVC mode 1
Applicable to high-performance
scenarios, featuring high rotation and
2
◎

INVT SPC Series Specifications

General

Brand	INVT
Model	SPC Series
Category	Inverter
Language	English