INVT SPC Series User Manual

SPC Series Solar Pump Inverter Function parameter list
-38-
P14 group Serial communication
Function
code
Name
Description
Default
Modify
P14.00
Local
communication
address
1–247
1
○
P14.01
Communicatio
n baud rate
0: 1200BPS
1: 2400BPS
2: 4800BPS
3: 9600BPS
4: 19200BPS
5: 38400BPS
6: 57600BPS
3
○
P14.02
Data bit check
0: No check (N, 8, 1) for RTU
1: Even check (E, 8, 1) for RTU
2: Odd check (O, 8, 1) for RTU
3: No check (N, 8, 2) for RTU
4: Even check (E, 8, 2) for RTU
5: Odd check (O, 8, 2) for RTU
1
○
P14.03
Communicatio
n response
delay
0–200ms
5
○
P14.04
Communicatio
n timeout time
0.0 (invalid); 0.1–60.0s
0.0s
○
P14.05
Transmission
fault
processing
0: Report an alarm and coast to stop
1: Keep running without reporting an
alarm
2: Stop in enabled stop mode without
reporting an alarm (applicable only to
communication mode)
3: Stop in enabled stop mode without
reporting an alarm (applicable to any
mode)
0
○
P14.06
Communication
processing
action
0x000–0x111
Ones place:
0: Respond to write operations
1: Not respond to write operations
Tens place:
0: Password protection is invalid.
0x000
○

INVT SPC Series Specifications

General

Brand	INVT
Model	SPC Series
Category	Inverter
Language	English