INVT SPC Series User Manual

SPC Series Solar Pump Inverter Function parameter list
-47-
Function
code
Name
Description
Default
Modify
P15.31
Vmppt max.
value
P15.27–6553.5V
During the max. power tracking, the PV
module reference voltage upper limit will
not exceed the value of P15.31.
The factory value depends:
Model
MPPT default
value
2.2kW
400.0V
4–7.5kW
750.0V
Model
depended
○
P15.35
Rated pump
flow
The pump flow is Q
N
when the pump runs
at the rated frequency and lift. Unit: m
3
/h
0.0
○
P15.36
Rated pump lift
The pump lift is H
N
when the pump runs
at the rated frequency and flow. Unit:
meter
0.0
○
P15.37
PV
undervoltage
point
When the PV voltage is less than the
value of this parameter, the system
reports the PV undervoltage fault.
The factory value depends on the model.
Model
PV undervoltage
point
2.2kW
70.0V
4–7.5kW
240.0V
Setting range: 0.0–400.0
Model
depended
○
P17 group Status viewing
Function
code
Name
Description
Default
Modify
P17.00
Set frequency
0.00Hz–P00.03
0.00Hz
●
P17.01
Output
frequency
0.00Hz–P00.03
0.00Hz
●
P17.02
Ramp
reference
frequency
0.00Hz–P00.03
0.00Hz
●
P17.03
Output voltage
0–1200V
0V
●
P17.04
Output current
0.0–3000.0A
0.0A
●

INVT SPC Series Specifications

General

Brand	INVT
Model	SPC Series
Category	Inverter
Language	English