Need help?Do you have a question about the ION TIGER and is the answer not in the manual?
General| Lamp Energy | 10.6 eV |
|---|---|
| Minimum Resolution | 0.001 ppm |
| Operating Humidity | 0 – 99% RH (non-condensing) |
| Resolution | 0.001 ppm |
| Power Supply | Rechargeable Li-ion battery |
| Operating Temperature | -20 to 50 °C, -4 to 122 °F (non-hazardous area) |
Legal disclaimer regarding manual accuracy and liability.
Explains safety symbols and important warnings for instrument usage.
Covers proper disposal of the instrument and packaging, including WEEE regulations.
Information on optional features, TigerPC software, and the TIGER kit contents.
Description of the functions of the A, B, Up, Down, Esc, and Enter keys.
Covers fitting the inlet probe, switching the TIGER on/off, and checking battery.
Instructions on selecting the correct gas and setting alarm levels for operation.
Overview of the TIGER's display screen layout and interpretation of status icons.
Explains the soft key options and how to navigate the instrument's menus.
Details on turning the TIGER on/off and initiating calibration procedures.
Covers configuring backlight, sound, alarms, zeroing, and other instrument settings.
Explains using Peak Hold, Information screens, Gas Selection, and Average functions.
Covers Data Logging (single/multi), Sleep Mode, and Stealth Mode for instrument operation.
Steps for installing TigerPC software and connecting the TIGER instrument via USB.
Navigating the TigerPC interface, including help, instrument lists, and data download.
Describes taking snapshots, saving configurations, managing gas tables, and firmware updates.
Details on viewing datalog sessions, health & safety readings, and managing snapshots.
Explains the available calibration methods: Factory and Custom.
Step-by-step guide for performing a custom calibration using the TIGER instrument.
Visual identification of all components of the TIGER instrument.
Instructions for charging, replacing, and maintaining the TIGER's battery packs.
Procedures for replacing probe assembly parts, including seals and PTFE filter discs.
Guidance on cleaning and replacing the lamp, electrode stack, and removing the MiniPID sensor.
Explains how to interpret diagnostic symbols and general fault clearing.
Provides troubleshooting steps for pump, battery, lamp, memory, and system errors.
Official documentation regarding product compliance with EU directives and industry standards.
Comprehensive technical specifications and warranty information for the TIGER instrument.
Contact details for ION Science offices and a log of manual version updates.
To Next Page
