TIGER Instrument User Manual V3.10
Unrivalled Gas Detection. Page 56 of 72 ionscience.com
2. Remove the Instrument Boot:
3. Release the clip at the rear of the instrument and lift the Rechargeable Battery Pack away
from the Instrument Body while sliding it slightly backwards:
4. Reverse the previous step to slide the replacement battery pack into the Instrument Body
and secure it using the clip.
5. Replace the Instrument Boot ensuring that it is snug around the front of the Instrument
Body and the lights are not obscured.
6. Charge the TIGER for 7 hours before use.
Replacement of Non-rechargeable Batteries
BATTERY REPLACEMENT: NEVER REPLACE PRIMARY ALKALINE BATTERY CELLS
WHILE IN A POTENTIALLY EXPLOSIVE OR HAZARDOUS LOCATION. USE ONLY
INDUSTRIAL BY DURACELL ID1500 BATTERIES.
Fitting batteries or connecting the Battery Pack with the wrong polarity may
result in damage to the instrument.
To Next Page
Loading...
Need help?
General
