ION TIGER User Manual

TIGER Instrument User Manual V3.10
Unrivalled Gas Detection. Page 67 of 72 ionscience.com
Technical Specifications
Minimum Resolution
0.001 ppm (1 ppb) *
Detectable Range
1 ppb up to 20,000 ppm *
Response Time
T90 < 2 seconds
Accuracy
+/- 5% display reading +/- one-digit (at calibration point)
Intrinsically Safe Approvals
• II 1G Ex ia IIC T4 Ga
• Tamb = - 15 oC ≤Ta ≤+45 oC (with Lithium ion Battery Pack)
• Tamb = - 15 oC ≤Ta ≤+45 oC (with Alkaline Battery Pack)
• ITS09ATEX26890X IECEx ITS 10.0036X
• 3193491 conforms to UL Std. 913, 61010-1 &
• Certified to CAN/CSA Std. C22.2 No. 61010-1
Battery Life
Li-ion:
• up to 24 hours
• charge time 6.5 hours
Alkaline 3 x AA:
• typically 8.5 hours life
Lamps
• 10.0 eV Krypton PID lamp
• 10.6eV krypton (standard)
• 11.7eV argon
Data Logging
> 120,000 data log points including date and time stamp
Communication
Direct USB 1.1
Calibration
2- and 3-point calibration (via calibration kit accessory)
Alarms
• Flashing LED’s amber (low alarm) red (high alarm)
• Sounder 95 dBA at 300 mm (12”)
• Vibration on alarm
• Pre-programmed TWA and STEL
Flow Rate
≥ 220 ml/min
Temperature
Operating:
• -20 to 60
o
C / -4 to 140
o
F (non-Intrinsically Safe environment)
Certified to:
• 15 to +45
o
C / +5 to +113
o
F (Intrinsically Safe environment)
Storage:
• -25 to 60
o
C / -5 to 140
o
F

ION TIGER Specifications

General

Lamp Energy	10.6 eV
Minimum Resolution	0.001 ppm
Operating Humidity	0 – 99% RH (non-condensing)
Resolution	0.001 ppm
Power Supply	Rechargeable Li-ion battery
Operating Temperature	-20 to 50 °C, -4 to 122 °F (non-hazardous area)