iPECS eMG800 - Message Cascade

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
157
COS.
Programming
Keyset Admin.
SYSTEM
VM COS Attributes (PGM 253)
SYSTEM DATA
Web Admin.
VM COS Attributes
Related Features
 Send a Message
Hardware
2.47.3.8 Message Cascade
Description
Message cascading copies or moves messages left for the originating mailbox to another mailbox.
Once the message is copied or moved into the each mailbox, notification events can take place
based on the mailbox settings. Multiple Mailboxes (up to 5 mailbox stations per a station) can be
assigned as Cascade Mailbox destination.
There are 2 options and timer.
1. Cascade Method : Decide Cascade Method
A. Disable Cascade
B. Copy Cascade
C. Move Cascade
2. Cascade Message Type : Choose Message Type for Cascading
A. All (Normal Message + Urgent Message)
B. Normal Message Only
C. Urgent Message Only
3. Cascade Timer: After Cascade Timer, Cascade is executed by sequentially form
Cascade Mailbox 1 to Cascade Mailbox 5.
Operation
Conditions
Operation of a Cascade Mailbox is automatic once configured, with 2 options combination,
Cascade way is decided.
1. Message Cascading is only allowed within programmed destination mailboxes in PGM
127, to protect unintentional cascade to other mailboxes.
2. Same cascade mailbox number is not saved in PGM 127.