iPECS eMG800 - Call Forward

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
56
2.15 Call Forward
Description
You can have selected incoming calls re-routed to other stations (local or networked), station
groups, the integrated Auto Attendant/Voice Mail, or over a system outside Line (Off Net).
The user selects the type and condition under which calls will forward by entering a Call Forward
code as follows:
Code 0
Remote Call Forward, forwards all calls to the station, except recalls, activated from a remote station, Call
Forward, Follow-me.
Code 1
Unconditional, all calls to the station, except recalls, are forwarded internally or externally immediately upon
receipt.
Code 2
Busy, if the station is busy, forwards all calls, except recalls, to the selected station.
Code 3
No Answer, forwards all calls, except recalls, to the selected station when the station does not answer within
the No Answer timer.
Code 4
Busy/No Answer, forwards calls if the selected station is busy or does not answer within the No Answer
timer.
Code 5
Attendant Off-Premise, forwards incoming outside calls to an outside number.
Code 6
Off-Net Unconditional, all calls to the station, except recalls, forward internally or externally, only SLT.
Code 7
Off Net Busy, forwards all calls, except recalls, to the selected station when station is busy, only SLT.
Code 8
Off Net No Answer, forwards all calls, except recalls, to the selected station when the station does not
answer within the No Answer timer, only SLT.
Code 9
Off Net Busy/No Answer, forwards calls if the selected station is busy or does not answer within the No
Answer timer, only SLT.
Operation
iPECS IP & LDP Phones
1. Lift the handset or press the [SPEAKER] button to receive dial tone.
To activate Call Forward, (Unconditional, Busy, No Answer, or Busy/No Answer)
2. Press the [FWD] button or Soft key. For the LIP8002, the [DND] button is used to activate
Forward.
3. Dial desired Call Forward code (“1”~“4”).
4. Dial the station or station group to receive calls.
Or, Dial an outside Line access code (9, 8xx, 88xx) and the desired external phone number.
Or, Dial *587(for Station ICR).
Or, Press the [SPEED] button and dial the desired bin number.
5. Replace the handset, return to idle.
1. Lift the handset or press [SPEAKER] button to receive dial-tone.
To activate Call Forward, Remote (Follow-me)
2. Press the [FWD] button or Soft key.