iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
269
only two Systems. In this case, employ the Network Numbering Plan to configure IP
address of the networked KSU LAN port as the Destination MPB IP address. Do not assign
an address for the BLF Manager in the Networking Supplementary Attributes.
Programming
Keyset Admin
SYSTEM
.
TCP/UDP Port Assign for BLF (PGM 321-Button 2/3)
BLF Manager IP Address (PGM 321-Button 4)
Duration of BLF Status (PGM 321-Button 5)
DEST SYSTEM IP Address (PGM 324-Button 6)
DEST SYSTEM Port number (PGM 324-Button 7)
NETWORKING DATA
Web Admin.
Net Basic AttributesCNIP Enable, CONP Enable
Net Supplementary AttributesTCP/UDP Port for BLF,BLF
Manager IP Address, Duration of BLF State
Net CO Line Attributes
Net Numbering PlanDest System IP Address, Dest System
Related Features
Hardware
Windows PC running the BLF Manager application
2.82.2.12 Centralized Attendant Service (CAS)
Description
Calls can be routed over the network to the Attendants of another system to provide Centralized
Attendant Service (CAS). A local System Attendant can route local Attendant calls to the Central
Attendants by activating Attendant DND. The Centralized Attendants receive the call under the
{Net DSS} button assigned for the local System Attendant. In addition, outside calls to networked
systems can directly ring the Centralized Attendants.
Operation
Local Attendant iPECS IP or LDP Phone
[TRANS/PGM] + {Flex Button} + [TRANS/PGM] + “83” + [HOLD/SAVE]
To assign [ATD DND] button
1. Press the {ATD DND} button.
To route local Attendant calls to the Central Attendants
To Next Page
Loading...
