iPECS eMG800 - Microphone Mute

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
378
5.13 Microphone Mute
Description
You can turn off the microphone of your iPECS IP or LDP Phone, which will stop audio
transmission from the handset, speakerphone or headset microphone, “Mic Mute”.
Operation
iPECS IP & LDP Phones
1. Press the [MUTE] button, the [MUTE] button LED is on and the microphone (Handset,
Speakerphone, Headset) is muted; the connected party receives silence.
To Mute the Microphone
1. Press the illuminated [MUTE] button, the [MUTE] button LED is off, and the microphone is
activated, transmitting audio to the connected party.
To activate the microphone
Conditions
1. Changing from speakerphone to handset or vice versa during a mute condition will
returns the microphone to an active status; your voice is transmitted to the connected
party.
2. Returning to idle or placing another outside Line or intercom call will change the mute
status to its normal (active microphone) condition.
Programming
Keyset Admin.
STATION
Headset Ring (PGM 111-Button 8)
Speakerphone/Headset Selection (PGM 111-Button 9)
STATION DATA
Web Admin.
Terminal Attributes Headset Ring, Speakerphone, E&MIC
Headset
Related Features
 Speakerphone
 Group Listening
 Headset Compatibility
Hardware
 iPECS IP or LDP Phone