iPECS eMG800 - VOIP SW (Soft VOIP Channel) for UCP

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
339
Programming
Keyset Admin.
STATION
SIP User ID Table (PGM111-Button 19)
Station IP Attributes (PGM 122)
CO/IP
CO/IP Line Group (PGM 141-Button 1)
CO VoIP Mode (PGM 141-Button 11)
STATION DATA
Web Admin.
Common Attributes  SIP User Table Index
Station IP Attributes
SIP DATA SIP CO Attributes
SIP User ID Attributes
CO LINE DATA Common Attributes CO/IP Group
VoIP Attributes

CO VoIP Mode
Related Features
 System Networking
 H.323 v4 Service
Hardware
 SIP Trunk
VOIP SW (Soft VOIP channel) for UCP
4.12.3 VOIP SW (Soft VOIP channel) for UCP
Description
VOIP SW is virtual channel. It has no Hardware. It can be installed according to VOIPCL8 license
in UCP100/600.
Operation
Conditions
Operation of VOIP SW Line Service is automatic.
1. Out band DTMF and 2833 is supported, not support In band DTMF.
2. Only G.711 codec is supported.
3. Call progress tone is supported by recorded source.
Programming
Web Admin.