iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
408
6.4 Attendant Positions
Description
The iPECS eMG80 system has the capacity for 4 Attendants (1 System Attendant / 3 Main
Attendants), iPECS eMG800 System has the capacity for 5 Attendants (1 System Attendant / 4
Main Attendants), and iPECS UCP system has the capacity for 50 Attendants (1 System
Attendant/49 Main Attendants). Attendants have enhanced call and control capabilities and are
designated to receive dial ’0’ calls from other users.
There are 2 different types of Attendant as follows,
System Attendant - The first station in the Attendant Group. In addition to Main
Attendant features, the System Attendant is commonly used for System Attendant
Programming, Admin Programming and Day/Night/Timed Mode control.
Main Attendant – Attendant group stations other than the first station of the Attendant
Group.
Operation
Condition
1. As a default, the first Attendant (System Attendant) is assigned as Station 100 (logical
number) for eMG80 and Station 1000 for eMG800, and others are not assigned. In the
eMG, the first digital phone port is designated as the System Attendant and is Station
number 100 for eMG80 and 1000 for eMG800.
2. As a default, the first Attendant (System Attendant) is assigned as Station 1000 (logical
number), and others are not assigned. In the UCP, the first digital phone port is
designated as the System Attendant and is Station number 1000.
3. Attendant calls (dialing “0”) and recalls are routed to first available attendant.
Programming
Keyset Admin.
System Attendant Assignment (PGM 164-Button 1)
Main Attendants Assignment (PGM 164-Button 2~4)
Web Admin.
System Attendant, Main Attendant
Related Features
Hardware
iPECS IP or LDP Multi-button Phone, a 24-button phone is recommended
To Next Page
Loading...
