iPECS eMG800 - Speed Dial Pause Insertion

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
219
2.75.2 Speed Dial Pause Insertion
Description
A pause dialing command may be inserted in a Station or System Speed Dial number. When
encountered, the system will stop dialing the Speed Dial number for the assigned “pause”
duration. You can insert multiple pauses into a Speed Dial number. The pause feature is often
used to allow external network equipment time to connect and deliver dial-tone.
Operation
System
Conditions
Pause operation is automatic when encountered; see Station or System Speed Dial for pause
entry.
1. The timed pause is used only with analog CO Lines.
Programming
Keyset Admin.
SYSTEM
Pause Timer (PGM 181-Button 10)
SYSTEM DATA
Web Admin.
System Timers

Pause Timer
Related Features
 Station Speed Dial
 System Speed Dial
Hardware