iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
305
1. Momentarily depress the Hook-switch.
While on an Intercom call, Unscreened call transfer
2. Dial Station to receive call.
3. Hang-up, return to idle.
Conditions
1. The [ICM] button, if configured, provides an appearance for the transferred station.
The LED indicates status and pressing the button connects to the station.
2. If the receiving station is busy, the transferring station may camp the call on to the busy
station, see Camp-On.
3. A station in DND or out-of-service cannot receive a transfer, and such attempts will
result in error tone.
Programming
Related Features
Exclusive Hold
Hold Recall
Call Waiting/Camp-On
DND (Do Not Disturb)
Call Transfer
Hardware
To Next Page
Loading...
