LIP-8008D User Guide
17
If you are the Attendant or Secretary, you may activate
Intrusion. You may also use Step Call; dial the next
station by dialing just the last digit of the Intercom
number.
3.1.2 To leave a Message Wait
If the called user does not answer or is in DND mode,
you may leave a Message Wait. The called user will
receive a Message Wait indication; the MSG LED will
flash.
3.2 External Calls
3.2.1 Placing external CO/VoIP calls
External calls are placed on CO/IP lines. These ‘lines’
are accessed either using a button on the iPECS Phone
assigned as a CO/IP line or using dial codes. The
CO/IP lines are grouped for different types of calls,
local, long distance, etc. Using the CO/IP line group
To Camp-On (wait off-hook) for a busy station:
While placing a call to a busy station, dial * and wait for an
answer.
To Callback (wait on-hook) for a busy station:
While placing a call to a busy station, press the CALL BACK
button and hang-up.
To make a Voice Over announcement to a busy station:
Dial #, and after the Splash tone is heard, begin speaking.
In iPECS-LIK
To activate Message Waiting:
Lift handset, and press the TRANS/PGM button,
Dial 556 (a confirmation tone will be heard) and hang-up.
To Next Page
Loading...
