LIP-8008D User Guide
19
NOTE—In the event of an emergency, assigned
Emergency numbers (ex., a 911 call) may be dialed
from any station in the System, regardless of a
Station’s dialing restrictions (COS).
3.2.2 Waiting for the next available CO/IP line
If all the lines connected to your system are busy, you
will receive an All Trunks Busy signal. You may request
to be notified when a line becomes free.
3.2.3 Account Codes: Tracking External calls for billing
In some cases, you or your company may desire to
track calls for billing or other purposes. When an
Account Code is entered, it is output from the system
to a printer in the SMDR report. An Account Code Flex
button can be programmed (refer to Assigning features
to Flex buttons).
To place an external call:
Lift the handset,
Select/dial the CO/IP line/group,
Dial the desired number.
To activate a queue if the selected/dialed line is busy:
Select/dial a busy CO/IP line,
Press the CALL BACK button,
Return to an idle state by going on-hook; when the line
becomes available, the Station will be notified with ringing.
To enter an Account Code before the call:
Lift the handset,
Dial 550,
Dial the Account Code (1-12 digits),
Press *, Intercom dial tone is heard,
Place the CO/IP call as normal.
To Next Page
Loading...
