iPECS LIP-8008D - 5. RETRIEVING & RESPONDING TO MESAGES; 5.2 GETTING VOICE MAIL MESSAGES

LIP-8008D User Guide
21
3.3.2 Using and Entering Saved Number Dial
You may store the last number dialed on an external call
to the Saved Number Dial buffer for convenient dialing
at a later time. The Saved number is stored until a new
number is saved.
3.3.3 Using System Speed Dial Numbers
The iPECS-100 system has memory allocated for 800
System Speed Dial numbers (bins 200-999). The
iPECS-300 & 600 systems each have memory allocated
for 3000 System Speed Dial numbers (bins 2000-4999).
The iPECS-MG100 system has memory allocated for
1000 System Speed Dial numbers (bins 2000-2999).
The iPECS-MG300 system has memory allocated for
2000 System Speed Dial numbers (bins 2000-3999).
The iPECS-1200 system each have memory allocated
for 12000 System Speed Dial numbers (bins 20000-
31999).
You may, if allowed, use System Speed Dial to call
frequently dialed numbers.
In some cases, these numbers are divided into groups
called System Speed Zone Groups. In this case, you
may access some numbers and not others and your
dialing restrictions may be invoked.
Only an Attendant can assign System Speed Dial
numbers.
To place a call using Saved Number Dial:
 Lift the handset,
 Press SPEED.
 Dial #
To store a number in the Saved Number Dial:
 While on an outgoing external call, press SPEED twice.
To place a call using System Speed Dial:
 Lift the handset,
 Press SPEED,
 Dial the desired System Speed Dial bin number (200-999 for
iPECS-100 or 2000-4999 for iPECS-300 or 600 or 20000-
31999 for iPECS-1200, 2000-2999 for iPECs-MG100 , or 2000-
3999 for iPECS-MG300).