iPECS LIP-8008D - Contrast (Ipecs-LIK); Network Config

LIP-8008D User Guide
36
7.8 Contrast (iPECS-LIK)
The Phone LCD brightness can be adjusted to your
preference.
7.9 Network Config.
The user can review the current network configuration
or modify a new phone network configuration.
To change the Phone LCD Contrast:
 While the phone is idle, press the VOL ▲▼ buttons.
 VOL ▲ will increase darkness.
 VOL ▼ will decrease dark (brightness).
To access Network Config. Settings:
 Press TRANS/PGM button and Dial 78(iPECS-LIK)/80(iPECS-
MG),
 Enter the password (default=147*), the following will display:
 MFIM #1 –
CHANGE[#]
 Press the # key to toggle between multiple profiles (MFIM),
 Press the VOL ▲ VOL ▼ buttons to advance to the next
network configuration item,
 Press the HOLD/SAVE button to save each setting.
To set default Config settings:
 In Network Config. Menu, use the VOL ▲ VOL ▼ buttons to
locate the Default Config Screen (shown),
Set default – [*]
 Press the * key.
To exit Config. Settings:
 Press SPEAKER,
 Press the * key to exit,
OR
 Press the # key to Reset/Reboot the phone with new settings.