iPECS LIP-8008D - To Disable Dialing from Your Phone; To Temporarily Override Dialing Restrictions at a Phone; Using Automated Dialing; Using Last Number Redial (LNR)

LIP-8008D User Guide
20
3.2.4 To disable dialing from your phone
You can temporarily ‘Lock’ your phone by activating
Temporary COS, which will disable dialing outside calls
from the phone. To deactivate Temporary COS you
must enter the Station’s Authorization code.
3.2.5 To temporarily override dialing restrictions at a phone
Override the dialing restrictions at any phone by
activating Walking COS. The Walking COS dialing
restriction levels are applied for a single call only. For
multiple calls, you will need to reactivate Walking COS
or use the FLASH button to regain CO/IP dial-tone.
3.3 Using Automated Dialing
3.3.1 Using Last Number Redial (LNR)
The last number dialed on an external call is
automatically saved in the Last Number Redial (LNR)
buffer.
To activate Temporary COS:
 Press TRANS/PGM,
 Dial 21(iPECS-LIK)/31(iPECS-MG) (User Program code),
 Dial your Authorization code(iPECS-MG),
 Press HOLD/SAVE.
To deactivate Temporary COS:
 Press TRANS/PGM,
 Dial 22(iPECS-LIK)/32(iPECS-MG) (User Program code),
 Dial your Authorization code,
 Press HOLD/SAVE.
To activate Walking COS:
 Press TRANS/PGM,
 Dial 23(iPECS-LIK)/33(iPECS-MG) (User Program code),
 Dial your Authorization Code (Station number and password),
 Dial ‘*’ (iPECS-MG),
 Place call as normal.
To dial the Last Number for an external call:
 Lift the handset,
 Press SPEED,
 Dial *.