iPECS LIP-8008D - Page 38

LIP-8008D User Guide
31
NOTE—The mobile extension may reconnect to the
transfer call by pressing the mobile flash digit(*).
In iPECS-MG
To register a mobile phone number:
 Press the TRANS/PGM button,
 Dial 51,
 Select Mobile Index 1 or 2,
 1 to activate, 0 to deactivate,
 Press the HOLD/SAVE button.
To activate a registered mobile phone from the user’s station:
 Press the TRANS/PGM button,
 Dial 52,
 Select Mobile Index 1 or 2,
 Dial the mobile phone number with CO Access code,
 Press the HOLD/SAVE button.
To place a call from the mobile extension using the iPECS System:
 Dial the ISDN DID number of the station; the system will check
the Caller ID and answer the call. The user then will receive
intercom dial tone,
 Place internal or external iPECS call as normal.
To Transfer a call from the mobile extension using the iPECS:
 Dial the mobile flash digit “*” while on an iPECS call,
 Dial the desired extension, the call is transferred and the
mobile phone returns to idle.