IPG YLS-2000-K - Page 161

161YLS-K
12.1.4 Messages of the Control tab
Message
Program active
Type
Status
Description
This status message is activated when a laser program starts. The status
message remains active until the end of the program.
More information about this status message can be found in chapter
Control tab [}97].
Message
End of program
Type
Status
Description
This status message appears after a laser program has been ended
without errors. The status indicator remains active until a new program
is started or the button Reset
is pressed.
More information about this status message can be found in chapter
Control tab [}97].
Message
Program interrupted
Type
Status
Description
This status message is activated when a laser program is interrupted
using the button Stop program
or program execution is interrupted
due to another reason.
More information about this status message can be found in chapter
Control tab [}97].
 | Appendix