User Guide
6.5 The Paper Tab
The Paper tab allows you to define values relating to image output (i.e., Auto Crop or not,
Scan Area, OverScan).
The Paper tab dialog box
6.5.1 Cropping
Cropping allows you to capture a portion of the document being scanned. Choice:
Automatic, Fixed to Transport, EOP (End of Page) Detection, Relative to
Documents.
Automatic adjusts the cropping window according to different
document sizes. Use this option for batches of mixed-sized
documents.
This feature allows you to define the area or zone to be imaged.
Use for batches of same-sized documents. If you select this option,
you can use the arrow keys to define the x and y offset values,
width and length to redefine your scanned area. The Display
window will show image placement as you change the values.
EOP (End of
Page)
Detection
This feature allows you to define the area or zone to be imaged.
Use for batches of same-width but different length documents. If
you select this option, you can use the arrow keys to define the x
and y offset values, width and length to redefine your scanned
area. The Display window will show image placement as you
change the values.
To Next Page
Loading...
Need help?
General
