User Guide
5.3 Reset Login Settings
Should you forget your login user name and password, you can press the Reset button for 10
seconds to resume to factory settings without login name and password. Press the Reset
button with a pin, paperclip or pointy object. The Reset button is recessed, so you will have
to insert the object inside the hole to press the button.
5.4 Exit the Wifi Mode
To exit Wifi mode, simply press the SD/PC Wifi button again. The Wifi icon in the LCD-
Display will be off.
Attention: when Wifi mode is on, the scanner does not time-out and automatically turns off
like it does normally. Therefore, it is recommended that you connect the scanner to your
computer or power adapter, via the micro USB cable, whenever you have Wifi mode on.
IMPORTANT: Be sure to re-connect your computer, tablet or phone to your normal Wifi
network when you are finished with your scanner connection so you will be able to connect to
Internet, your email and other web related locations/programs again.
To Next Page
Loading...
Need help?
General
